Many hope that their white table and chairs will be the center of attention in their dining room. While most of the time it is, sometimes it isn’t. This could be due to many reasons, including clutter or a poor arrangement.
This post will explore a few ideas you can use to make your dining table and chairs the room’s prime focus.
Let’s dive in!
7 Ways to Make Your White Table & Chairs a Dining Room Focal Point
1. Use Cushions
Sometimes simply adding these plush items can help highlight your table. Besides their unique patterns, the pillows can make your chairs more enjoyable to sit on.
There are two options for adding these. One is to buy some and place them on the chair’s seat. The other method is to embed the cushion into the chair. While this can take some time, it gives the piece a sophisticated look. It also discourages them from sliding around.
How to Add Upholstered Cushions
If you’re interested in applying built-in cushions, you’ll need to collect:
- Fiberboard
- Foam
- 4 carriage bolts and nuts
- Clamps
- Drill
- Staple gun
- Fabric
- Utility knife
Step 1: Find the Right Size
To begin, place the fiberboard on your chair and secure it in place with the clamps. Measure the board according to the seat’s dimensions. You’ll then want to use a utility knife to cut the shape out.
Step 2: Drill the Holes
Once you’ve pierced the fiberboard, take a drill and make holes in each of the seat’s four corners. After you do this, use a clean towel to wipe debris off. Then, slide the carriage bolts into each opening.
Step 3: Prepare the Foam Cushion
You’ll now want to carve the foam so that it fits perfectly on the fiberboard. When this is done, put the entire seat on your desired fabric. Make sure that the foam portion is facedown on it. Fold the linen over the seat’s edges and cut it so that only an inch or two dangles over. You’ll then want to grab your staple gun and use it to secure the cloth in place.
Step 4: Situate on the Furnishing
Now, take the seat and put it on your chair. Slide the nuts on the bottom of each carriage bolt to keep the cushion steady.
2. Place Flower Arrangements On It
Flowers not only add a touch of color but will send a relaxing fragrance through the room.
You can use fake flowers or authentic ones. However, keep in mind that both have their pros and cons. For instance, artificial choices are cheaper and last. But, they can collect particles and appear worn over time. On the other hand, fresh flowers can be pricey, but they have a wonderful aroma and tend to be more distinctive.
Throughout the year, you could also transform your table by adjusting the arrangements. This can help the piece stand out because its looks change with the seasons. Because of this, it can add a new flair.
There are plenty of flowers and botanical filters you can add to it. Some to look for are:
- Hydrangeas
- Eucalyptus branches
- Daisies
- Chrysanthemums
- Tulips
- Peonies
- Birch sticks
If you need inspiration, spend some time browsing online sources. You’ll discover numerous ideas you can use to create your own floral presentation.
3. Use Mirrors
Mirrors are a convenient method you can use to secretly add more dimension to the room. By strategically putting them on the dining space’s walls, they’ll add more depth. They’ll also help it appear brighter. Both of these will combine to make your table stand out.
You can use one large mirror or hang a handful throughout the room. You might also try bunching small mirrors together to create a mosaic-like appearance. But, make sure to not overdo it. Too many can end up looking tacky.
4. Coordinate Them With Art
Placing pictures or sculptures around the dining room is another thing to attempt. While you can install any pieces you like, it’s important to look closely at each item. By doing so, you can confirm that it complements your table rather than take away from it.
Some ways to tell if art will work in the room is by:
- Checking if it has hints of the room’s colors
- Examining its lines and angles
- Making sure its scale matches
If you’re still unsure about what pieces to go with, lean more toward simple ones. These choices are versatile so they’ll generally fit in.
5. Add a Rug
A rug can help the white pieces stand out, especially if it’s a contrasting color. Rugs will also protect the floor. This way, you don’t have to worry about the table and chair legs leaving scratches.
You can choose any hue or pattern you like, but a darker tint is typically optimal. This is because it brightens the table and chairs. By doing so, showcases the pieces and makes them one of the first things you’ll see in the room.
Besides its design, also check its style. Most rugs will come in high-pile or low-pile options. While both are stunning, they have many differences.
High-Pile
This carpet indicates that its fibers are longer. This makes the rug appear thicker and taller than the low-pile ones.
Many times, a high-pile selection is sought-after because of its cozy look. It’s also more resistant so it won’t flatten over time.
Low-Pile
Unlike high-pile carpets, low-pile ones have thin threads that are tightly looped. This gives it a thinner appearance.
While some dislike the smoothness of low-pile carpets, it does have benefits. Because its fibers are close together, it doesn’t collect allergens. This makes it a good choice for those who are concerned about these particles sneaking into it. This option is also easier to move devices, like vacuums, over.
6. Clean It
One of the best ways to spotlight your furniture is by cleaning it. This will keep dirt and dust from settling on it. This will keep the pieces shiny and long-lasting.
While white furniture is generally easy to clean, you do need to be careful. If you apply a strong agent or don’t dry it, the pieces could get ruined.
Here are a few possibilities you can safely clean your furniture with.
Rub a Microfiber Cloth Over It
A microfiber cloth is a great tool for quickly dusting things. Contrary to traditional towels, microfiber gadgets feature delicate fibers. As you run the cloth over the furniture, these threads will cling to debris. Thanks to this, it will loosen particles rather than spreading them around. The cloth can also assist you with getting into crevices. This will make sure that no sections are overlooked. Ideally, use a microfiber cloth about once a week on the pieces.
Concoct a Vinegar/Water Mixture
If you notice mildew or stains on the table or chairs, a vinegar and water solution is useful. While it might seem like these two options would be harmful, they aren’t. They’ll not only sanitize the items but boost their looks.
To make this, blend about one cup of white vinegar with two cups of lukewarm water. You can then dip a cloth into it and start scrubbing problem areas. Let the solution sit on the spots for several minutes and then wipe them off.
While safe, always make sure that the sections are completely dry. If not, the liquid will ooze into the material. This could cause them to distort.
Protect it From the Sun
Sunlight can wear down your white furniture. Its strong rays will negatively interact with its finish which can cause it to turn yellow. If you don’t conserve the pieces, you’ll notice that they’ll end up being an eyesore.
To prevent this, make sure to remove the pieces from the sun. While this might seem like a hassle, it’s very easy to do. Here are some methods for shielding them.
Purchase UV-Blocking Slipcovers
One technique is to use UV-blocking slipcovers. This device will reflect the rays and avert them from seeping into the items. To use the slipcovers, unfold them and wrap them around the table and chairs. While this process might take a bit of time, it’s a sure way to protect them.
Remember, only use UV-blocking options. Regular slipcovers won’t defend your furniture and you’ll be in for an unpleasant surprise if you do use them.
Install Sun Blinds
If you don’t want to worry about slipcovers, consider sun blinds. These devices can be installed over the dining room windows and will keep sunlight out. While they might be a pricey investment at first, they’ll ensure your furniture lasts for years.
Apply a Varnish
This is another alternative for safeguarding your table and chairs. This liquid will seal the furniture. This won’t only protect it from blemishes, but sunlight. It can block damaging rays because its solvents don’t allow them to soak into it.
To apply varnish, pour some into a paint tray and swirl a paintbrush in it. Take the brush and wipe it over the table and chairs. Make sure to use gentle strokes that move in the same direction. Otherwise, you risk the application being too thick or thin in various areas.
After you cover the pieces, leave them to dry. It’s vital to give it time to fully do so. If you don’t, the varnish could bubble. It could also allow moisture to sneak in which could warp the furniture.
Move It Out of the Sun’s Path
In some cases, the best option is to re-arrange the table. This will assist you with ensuring the piece is out of any sunlight source. Often, pushing it near a wall is ideal. This is because the wall will guard the table and reflect UV rays away from it.
If you find that your dining room is filled with sunlight, you might need to find a different space. While this can be a slight inconvenience, it ensures the items stay durable. But, it will ensure your investment lasts for years.
7. Appraise Its Position
The furniture’s placement is yet another crucial aspect to look at. If the table and chairs are put away from the room’s center, they’ll be disregarded.
There are some things you’ll want to observe to assist you with finding the right layout.
The Existing Furniture
One is the number of items in the room. If you have too many in it, they’ll take away from the table and its chairs. Because of this, only keep about one or two large pieces in it. This will open up the room and allow guests to view your table once they enter the space.
Where it is in the Room
You’ll also want to make sure that the table and its chairs are placed directly in the middle of the room. If they’re shoved to the side or not centered, they’ll be ignored. They might also look a bit strange because they’re not placed in a central location.
If There are Architectural Details
Some might think that setting your table and its chairs near bold room features would take away from it. But, this isn’t usually the case. By placing them near these quirky characteristics, they’ll enhance the pieces.
Some to look for include:
- High-ceilings
- Beams
- Fireplaces
- Distinctive wall angles
- Arched or bay windows
If you find that the room has more than one of them, contemplate which would be more substantial. You can then arrange the table near it.
Look at its Proportions
The last thing to check the table’s size. If it’s large, you’ll need to make sure that there’s enough area for people to stroll around it. If not, space will become cramped. As you place it in the room, verify that there’s a wide gap between items.
To Conclude
It can be difficult to figure out the right ways to make your dining room table and chairs a focal point. But, with the ideas above, you can easily do so.
You’ll discover a vast amount of white table and chairs during your search. Many of these are affordable and durable options. This way, everyone can find something that matches their taste.